This project was archived.
Winston made landfall at 06:30 UTC (18:30 local time) on the north of Viti Levu, the main island in the archipelago. From there it moved west, and the large storm narrowly avoided the capital city of Suva.
The storm has reportedly destroyed entire villages and many homes were damaged or destroyed. Thousands of people are currently in hundreds of evacuation centres until they can return to their homes, if possible.
Winston also damaged power lines, leaving 80% of the population without power and impacting communications across the more than 300 islands in the archipelago. This limited or lack of communication is making it difficult to assess the full scale of the damage in the more remote islands. It is believed that some of the islands may have suffered far more damage than the main island. There are reports that Koro Island, one of the larger islands, may have suffered "catastrophic" damage.
Repair and recovery efforts began on 22 February, and rescue workers priorities are restoring communications and provided clean food and water to the many affected by the cyclone.
Created by russdeffner - Updated - Priority: low
- Entities to Map
- buildings mainly, roads if needed
- Changeset Comment
- #hotosm-project-1581 #cyclone_winston Vanua Levu Island buildings and roads mapping. When saving your work, please leave the default comment but add what you actually mapped, for example "added buildings and a residential road".
Project Specific Mapping Notes
- You will need to use Bing and Mapbox imagery (iD -> Background Settings (on right, icon looks like 3 stacked sheets) -> Select Mapbox). Use Bing where available and clear.
- Align Mapbox to objects already mapped with Bing (iD -> Background Settings (on right, icon looks like 3 stacked sheets) -> Fix alignment -> use arrows)
- We are beginning the organized mapping of the 'north island', Vanua Levu, many of these areas have been mapped to various degrees.
- Imagery availability across the North Islands goes back and forth between Bing and Mapbox for quality/cloud-cover, check both.
- Please accurately outline all the buildings you can find. The outline should be for the full size of the building even if it is partly covered by trees in the imagery.
- After drawing the outline, use the 's' key in the web editor to "square" the corners. In iD you have to select the building again after tagging it a building.
- Many buildings are very close, but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads or residential area outlines. Zooming in very close to map helps with this!
- In the iD web editor, the first time you map a building you will use the "Building" category and then at the bottom of the list select "Building" again, this is the most generic building tag we can use as we almost never can tell the more specific use of any building from imagery alone.
Roads and Paths
- Please map roads and major paths as completely as possible by connecting them to the main road networks where ever possible.
- Very short segments that do not connect to anything should not be mapped.
- Short segments of a road or path that you cannot see through the trees but seem very likely to exist should be mapped to keep the road complete
- Try and map a little beyond your task square so the person who maps the task square next to yours can easily connect them.
- Always connect roads to other roads where they meet and never end roads on Residential area polygon edges.
You will most often use the following road classifications:
- highway=residential - Only in the city area for roads that just access buildings, most other roads are one of the classifications below.
- highway=unclassified - This is for roads that a vehicle with 4 wheels could travel on that connect small villages and settlements or groups of buildings in rural areas.
- highway=track - This is for roads that a 4 wheel vehicle or farm tractor could travel on and only lead to farm fields or forests. They do not connect settlements.
- highway=path - This is for small paths that a 4 wheeled vehicle could not travel on and are usually used by people on foot or 2 wheeled vehicles. They may or may not connect settlements or lead to farm fields. Only map the major paths that connect to settlements or other roads.