#1002 - Nepal Earthquake, 2015, Road Network, villages and buildings - task 4 (Archived)

cdgiamarino validated #15

cdgiamarino validated #2

achims311 validated #5

achims311 validated #95

achims311 validated #97

Navin Acharya validated #161

Navin Acharya validated #157

Dave Smith validated #45

achims311 validated #162

m902 marked #112 as done

m902 marked #177 as done

achims311 invalidated #112

m902 marked #173 as done

florisje validated #59

florisje validated #60

Manu1400 validated #23

Manu1400 validated #100

Andrew Aylett validated #115

Boggedy validated #90

Boggedy validated #63

This project was archived.

DO NOT DO THIS TASK ANYMORE, we are on the 2nd pass of mapping, please go to Task 1018

The international community is responding rapidly. The international charter has activated. We are also coordinating with international organizations and the DHnetwork.

Hundred of deaths reported after a few hours.Communications are hard at this point.

First priority established in the first hours after the Earthquake, is the road network to connect to remote areas.

In this area, you will mainly find paths plus the Manaslu trekking path already traced. Please revise. Trace also villages and houses.

Created by PierZen - Updated - Priority: medium

  Instructions

Changeset Comment
#hotosm-project-1002
When saving your work, please leave the default comment but add what you actually mapped, for example "added buildings and a residential road".

In this area, you will mainly find paths plus the Manaslu trekking path already traced. Please revise. Trace also villages and houses.

Do not trace all the paths in the fields or small paths of a few hundred meters that do not connect to road networks. This make more difficult to read the map and identify the important paths.

Imagery

Comment  source=Bing Imagery
If any problem with Bing Imagery, verify if MapBox covers the area.

Road tagging guide

From Nepal roads page on the wiki

  • highway=primary Road corridors that carries a huge volume of traffic between arterial roads and has a high density of public transport services. These roads often connect two relatively distant localities in urban areas.
  • highway=secondary Collector roads that carry lower volume of traffic and has either no public transport service or a lower density of public transport service. These roads often connect two neighboring/nearby localities in urban areas.
  • highway=road Roads traced from satellite imagery for which a classification has not been determined yet. This is a temporary tag indicating further ground survey work is required.
  • highway=residential General residential roads in a planned locality. Wide enough to carry slow moving residential traffic.
  • highway=service Generally for access to (or inside) a building, industrial estate, universities, parks, etc.
  • highway=pedestrian Roads that are almost exclusively used by pedestrians and are out of bounds of motor vehicles in normal conditions, such as plazas and squares.
  • highway=track Unpaved motorable tracks

Also, look out for pedestrian suspension bridges. They are common and can look like this. Tag as: bridge=suspension / highway=footway / layer=1

  Start contributing

Contributors Done Assigned